Collection:
Complete Catalog
346 productsPAPYHOBBY is a small business of Manufacturing and Production of custom build scale model.
You want a custom product build from our PAPY :) click here
D8h / D8k Sticker Sheet V2
Waterslide Decals / Various brands in different sizes. Guidance Marks are cut free of the sheet, and then placed in a saucer with water in approx. 10-20 seconds. When the brand loosens from the bac...
Sold Out
1/50 - Tire - Goodyear Marathon- Rear
1:50 GOODYEAR Marathon 11.00 R22,5 - Rear Tire
Fits the following Trucks:
Kenworth T800 / T880;
Peterbilt 379;
International HX 520 / HX 620;
Western Start 4700 / 4900 / 49x;
CAT 6XX
Compo...
Sold Out
1/50 - Tire - Goodyear - Trailer
1:50 GOODYEAR 11.00 R22,5Sold in set of 2 tires
Fits the following Trailers:
American / Australia trailers
Manuf by Drake, WSI, Tekno, etc...
Component: Tire
Material: Rubber
Parameters: D - 20...
Sold Out
1/50 - Double Pipe Brackets
Double pipe brackets (approximately 24 brackets)
Scale: 1:50th
Sold Out
1/50 - Quadruple Pipe Brackets
Quadruple pipe brackets (approximately 24 brackets)
Scale: 1:50th
1/50 - Single Pipe Brackets
Single pipe brackets (approximately 24 brackets)
Scale: 1:50th
Sold Out
1/50 - Engcon Ec233 Tiltrotator with Gr30 Grab Module
Engcon EC233 Tiltrotator with GR30 grab module
Quickhitch to fit 25-35T excavator models. Q-hitch ID ~8mm.
Scale: 1:50thManufacturer: GEMPart #: GF97-2
1/50 - Technomichaniki Block Pusher
Technomichaniki Block Pusher
fit 40-50T models, direct fit to dipper
Scale: 1:50thManufacturer: GEMPart #: GF110
1/50 - Yamamoto Hrb1700 Rock Splitter
Yamamoto HRB1700 Rock Splitter
Scale: 1:50thManufacturer: GEMPart #: GF63
#demolition
1/50 - Indeco Hp12000 Hammer with Oilquick Hitch
Indeco HP12000 hammer, with 3 interchangeable points and OilQuick hitch,
Inner diameter of hitch is ~14mm, Distance between hitch pins is 15mm. To fit 60-100T excavators.
Scale: 1:50thManufacturer:...
Sold Out
1/50 - Engcon Toothed Digging Bucket
Engcon Toothed Digging Bucket to fit the Engcon EC219
Toothed Digging Bucket to fit 14-20T excavator models.
Scale: 1:50thManufacturer: GEMPart #: GF47-3
Sold Out
1/50 - Engcon Ec233 Standard Tiltrotator
Engcon EC233 Tiltrotator
Sstandard tiltrotator and quickhitch to fit 25-35T excavator models. Q-hitch ID ~8mm.
Scale: 1:50thManufacturer: GEMPart #: GF97-1
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device